Jim Mahoney
Senior Member
Posts: 2243
Loc: California
Reg: 06-17-03
|
 07-06-05 01:38 AM - Post#63366
In response to n1lul
Hello n1lul,
There is a 2300 maH TX battery and I think Ernie can do a 3000 maH TX battery for you.
Ernie can also turn your TX into a Single Stick Radio for you, will you will have three controls on one stick but you will still have two sticks and use a TX Tray.
When I lived in Japan I got the parts from JR and converted my PCM9 into a single stick radio and used a TX tray just like the Multiplex - Worked Great. I mixed the signal from the old Tail Rotor control with the new control on the 3-axis stick - the old control supplied 20% movement and became my new Tailrotor trim - I removed the spring and added enough friction until I could move the throttle without moving the trim. I have thought about doing this with my MC4000 but with Heading Hold Gyros maybe I wouldn't need the trim - then again maybe 4% trim range instead of 20%.
I use the Multiplex tray.
Multiplex - ACT Radios, Youngblood Gyros & Governors, YS Engines, Blitz AVRO 90 - Phoenix Simulator - A123 Batteries - Mikado Helicopters - Hacker Motors & Controllers
|
|
